Glove box door bolt repair

[Jsand73440]

Any ideas for a repair of these small studs or replacement? Not sure how i would get them out of the glove box door.

[R/T's 4 R/P]

IMO...get another door.
Glove box doors are readily available and trying to fix those studs is not worth it.

[Jsand73440]

IMO...get another door.
Glove box doors are readily available and trying to fix those studs is not worth it.

really? You got a source for new doors? All i see is used ones available, likely with the same problem

[ec_co]

I see a few decent looking ones on n fleabay, like this one

https://www.ebay.com/itm/115474336552?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=XDSiFqlfSo6&sssrc=4429486&ssuid=wSYsSEE9TBi&var=&widget_ver=artemis&media=COPY

[Katfish]

If there is a way to get those out without destroying the metal, I'd think a nutsert would work there.
Then just use screws to attach the hinge.

[EV2RTSE]

PM sent.

[EV2RTSE]

On second thought, are you sure those studs are actually broken off? They're short to begin with, they only give you a few threads for the acorn nuts to grab onto after the catch is put on.

[headejm]

Any ideas for a repair of these small studs or replacement? Not sure how i would get them out of the glove box door.

Those studs don't look broken to me. 

[Katfish]

I agree, length is correct.
I assumed they were stripped.