Seat track disassembly

[R/T's 4 R/P]

Cody, that is quite the production line!  Nice!

In the one picture it shows the 'riser' side that is hard riveted to the assembly. I've never taken that apart.

Yes, the tiny pieces in the tracks are interchangeable from other years and other models.
I've not found that you can tighten them in any way.  They are usually loose because something came apart inside. Reassembled and greased it should be fine.

I wish someone just reproduced the bottom 'flat-ish' part that always gets bent and rusts.
You may want to add a small weld to the stud head in the track to hold it in. I have found That once dislodged from their pressed instate they are loose and then are a Bee-atch because they keep moving around.
Once they are all cleaned..then paint...then grease and reassemble.