Upper Door Panel Clip Location and Orientation

Dmod1974 · February 14, 2021, 12:05:32 PM

My originals were long gone, and after scouring the interwebs I can't find any pics of where/how they attach to the door panel. Can anyone post up a pic? I can't figure out what they are supposed to do since the door shell doesn't seem to have any tabs or slots for them to attach to.

71vert340 · February 14, 2021, 01:55:20 PM

On Challengers, the upper part of the door panel just slips over the top of the inner door sheet metal. No clips on door panel except along bottom edge. There are screws along the outer edge of panel.
Terry W.

Dmod1974 · February 14, 2021, 02:22:34 PM

So these aren't needed?

71vert340 · February 14, 2021, 02:41:59 PM

They bolt to the inner door sheet metal. I don't have a Challenger apart right now but I believe my 74 Charger has the same clip. I'll look and take a photo if it's the same.
Terry W.

71vert340 · February 14, 2021, 02:51:35 PM

Sorry. My 74 Charger panel door mounting is different than a Challenger door panel. There's 3 clips on the top edge of the door panel that clip over the upper edge of door inner sheet metal. Here's how they clip on top edge of door panel.
Terry W.

71vert340 · February 14, 2021, 02:56:25 PM

Backside of panel showing a clip.
Terry W.

71vert340 · February 14, 2021, 03:04:30 PM

There's 3 of those clips on each door panel. Here's yellow tape marking where the other 2 clips go. I hope the photos helped. With those 3 clips installed on the door panel, the door panel just slips over the inner door sheet metal
Terry W.

Dmod1974 · February 14, 2021, 03:14:54 PM

Mystery solved, thank you!

cudamadd · February 14, 2021, 09:19:55 PM

I just ordered them and hoping it will help fix my rattel in the upper door area

anlauto · February 15, 2021, 07:21:22 AM

Quote from: cudamadd on February 14, 2021, 09:19:55 PM
I just ordered them and hoping it will help fix my rattel in the upper door area

They won't solve a rattle

dodj · February 15, 2021, 07:37:10 AM

I'm not sure the factory actually used three clips per door. I've only ever seen one or two. Usually just the middle one.

anlauto · February 15, 2021, 07:54:55 AM

Quote from: dodj on February 15, 2021, 07:37:10 AM
I'm not sure the factory actually used three clips per door. I've only ever seen one or two. Usually just the middle one.

That's been my findings as well...they are pretty useless.

FE5CUDA · February 15, 2021, 10:06:02 AM

There was only one clip ever used in the center and yes it will pull the top of the panel closer to the glass and help your "rattle" issue.

JS29 · February 15, 2021, 10:31:29 AM

If a clip was USELESS than why would it be on there?

dodj · February 15, 2021, 10:32:46 AM

Quote from: FE5CUDA on February 15, 2021, 10:06:02 AM
it will pull the top of the panel closer to the glass and help your "rattle" issue.

Maybe, but I'm not so sure. I feel the adjustable 'fuzzies' have more to do with that?

Door panel clip Started by Rich G. on Interior	2 Replies 800 Views	Last post: August 27, 2018, 06:35:56 AM by Rich G.
Door panel clip plates? Started by 70Barracuda on Interior	1 Replies 595 Views	Last post: May 07, 2019, 07:58:02 PM by Timbbuc2
Door panel clip question Started by Wayne on Interior	5 Replies 744 Views	Last post: November 12, 2022, 07:35:57 AM by 71vert340
Door panel clip plates? Started by 70Barracuda on Interior	10 Replies 1095 Views	Last post: May 06, 2019, 07:52:08 AM by 70Barracuda
Door panel retainer clip base Started by Challenger in NC on Interior	0 Replies 556 Views	Last post: December 31, 2019, 03:10:27 PM by Challenger in NC