Main Menu

3G Hemi Mounts-Schumacher

Started by moparcar, July 02, 2020, 05:05:01 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

moparcar

Does anyone know what the status of Schumacher Creative Services AKA  http://engine-swaps.com is? They don't have a working phone and they don't answer emails. I would prefer spool mounts for my 3G swap but I believe they are the only source. Is TTi the only other engine swap mount available for a stock k-frame configuration? Schumacher has listed the 3G swap mount as out of stock for over a year I believe. Maybe i just don't know the status. Any info? Maybe the TTi are the way to go anyway? Thoughts?

Thanks!

anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

moparcar

@anlauto Thanks Alan. I could have swore I looked at Mancini yesterday and they didn't show them......Obviously I just missed them. I appreciate it!

Anyone have experience good or bad or suggestions on the Schumacher vs TTI mounts?


Cuda70-74

1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

moparcar

If I were looking for weld in those are pretty decent but I'm just talking conversion mounts which are basically TTi or Schumacher i believe. Thanks though......

Northcuda

Bouchillon Performance also offers engine mounts. But not in spool mounts.  :dunno:
https://www.bouchillonperformance.com/inc/sdetail/669/740
A Barracuda 70 that wants to be as big as a Cuda Trans am.

RUNCHARGER

I think Schumacher has shut down so that will narrow your choices.
Sheldon


Cuda70-74

Quote from: MoparCar on July 03, 2020, 06:29:00 AM
If I were looking for weld in those are pretty decent but I'm just talking conversion mounts which are basically TTi or Schumacher i believe. Thanks though......
Their welding and bolt in type too
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger