Battery Relocation, Vintage Air, Hotwire Harness

[anlauto]

No fair I was still typing 

[rebelyell]

I wondered what that box did!

Aaaaand there goes another $100

[Filthy Filbert]

I plan to use the holley computer and harness since the tuner I use for Dakota stuff (5.9/360 gas V8 engines) says the holley stuff is pretty easy to use.

Will need to investigate to see if it has an OBD-2 port, or any kind of outputs that I can wire to an OBD-2 plug.

[rebelyell]

https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1105/category_id=-1/mode=prod/prd1105.htm

Looks like this one gets the signals from the holley stuff.

[Filthy Filbert]

Well that settles it! I'm going with the Dakota digital dash!   

[rebelyell]

Found out today from Hotwire and confirmed with Dakota Digital that the OBD BIM adapter will not output oil pressure to the DD gauges. Have to run a separate sensor.

[anlauto]

I thought they had that fixed  Guess not

[Dmod1974]

Found out today from Hotwire and confirmed with Dakota Digital that the OBD BIM adapter will not output oil pressure to the DD gauges. Have to run a separate sensor.

No, you don't. I have one and it works fine. Mine was an older one that I had to send back for a firmware update. Their tech support is spotty ; I had to go in circles with them before I got a hold of someone who knew what they were talking about.

[rebelyell]

I already bought the module anyway. I'll plug it up and try it whenever the time comes.