Radiator for Gen III swap

[anlauto]

Okay guys...what rads are you using and are you happy with them ? Did they come with fans/shroud ?

@GoodysGotaCuda

@303 Mopar

[JpRngr]

I used a triple pass aluminum radiator from Eastwood. Was on sale couple years ago for $100 and, I believe, the fan and shroud were another $150-200. Biggest problems were the lack of an integrated trans cooler and the bottom outlet was on the driver's side, so I had to figure out a lower hose. Overall, been pretty happy with it, no overheating issues at all.

Corey

[CudaA39]

I'll be using a new OE 26" and the stock fan shroud with an electric fan hidden inside.  No mechanical fan.  Makes finding hoses a challenge but in my opinion to retrofit a new style rad looks funky.

[GoodysGotaCuda]

I am using a Champion radiator with V6 Ford contour fans, so far it works pretty well overall.

I only run on low speed for cooling and high for a/c


Sent from my iPhone using Tapatalk

[Chryco Psycho]

I bet if you go look Dan listed it in his build thread , he has not been on this site in months now .

[Cuda70-74]

Im using a modern day charger and challenger radiator.

[b5cuda]

I was wondering about using the factory late model stuff, since it was designed to match the 5.7.  Was the radiator easy to mount in an e-body?  Any fitment issues?  Are you also using the factory cooling fans? 

[Cuda70-74]

@B5cuda here are some more pics

[b5cuda]

That's helpful, thanks!

[Cuda70-74]

That's helpful, thanks!

No problem glad it helped. I also used the gen 3 hemi radiator hoses also