73 340 Magnum & Numbers Matching A833 Pistol Grip 4 Speed

[Dodgeman]

Let's try this again with ALL the information and pictures you need. Located in Jacksonville, Florida

1973 340 Magnum from a Petty Blue Cuda. Laid my hands on the car. Motor turns over. Was planning on a rebuild before installing. Have not pulled the heads to check for standard bore
Block Casting Numbers showing 340
Block Date Code showing produced in 73
Block Numbers on pad below driver side cylinder bank match transmission
Block was original blue color, somebody painted in orange at some point

CLEAN inside X Heads ( Wasn't available from Chrysler on a 73 240), looks like aftermarket valve springs
Aluminum Intake- Older Edelbrock Torker 340 Intake Single Plane
750 Double Pumper Holley
Harmonic Balancer
Pulley suggests an A\C Car
New Hooker Ceramic Coated Headers
Original 1973 Distributor

Numbers Matching 23 spline, A833 4 speed
Rebuilt by Passion Performance, never used, have invoice, still in the crate.
Original Shifter
Original pistil grip shifter Handel
Aluminum bell housing
Pressure Plate
Clutch Disk
Flywheel
Clutch fork
Shift rods, all other parts for a complete A833

Call me: 904-599-7817

Have 40 pictures I thought uploaded. Please know I can send to any and all that want to see them until I figured out how to include them.

[mopartaz]

Glad you put the phone #. I'm sure someone will ask: Engine : is this still in the car? and did you hear it run?  I know if i were buying it used i would like to inspect the inside of the engine block for wear, cylinders, crankshaft, etc.
Trans parts: is the flywheel,clutch and  bearing etc new or used?
And are the headers new or used? Just some food for thought.

[Dodgeman]

Still trying to upload the 40 plus pictures I have. Bought the engine and transmission as one assembly already out of the car. So, never heard it run. Know the person well who sold it to me well and have bought many parts from him over the years. It was running when he pulled it out. Body of the Cuda was past saving. I broke down the transmission to send off for rebuild. Planned on the same with the motor. Turned it over last night while taking pictures. Never would take the chance of installing 47 year old engine without going through it. Can pull the heads for whomever wanted to see the cylinder bores and check for bore size.

[Dodgeman]

Headers are new. All the clutch parts flywheel, pressure plate, shifter, etc are from the original purchase. I had planned on upgrading.

[anlauto]

Do you have a asking price in mind ?

[Dodgeman]

Thinking $8000.00 for everything.

[mopartaz]

How much was the trans to rebuild?

[Dodgeman]

Have a invoice, in my name, from Passion Performance for $1299.00

[Dodgeman]

NEW INFORMATION!!!!!!! Now have the location of the numbers matching body to mate with these parts. You could have a true numbers matching 1973 340 Cuda. In Northeast Florida within 50 mile of where I'm located. Please let me know if are interested.

Telephone# 904-599-7817