Snowdoggie's Cuda - Challenger Parts for sale list.

[Snowdog]

Ok, well some of these parts have been for sale here and elsewhere on other Mopar sites.  So, I tried to make a master list of what I have for sale, to reduce any confusion.  Anyways, here are some parts for E-Bodies, unless otherwise stated, if the part can be shipped, that will be an extra cost.  All the parts are in SW Michigan.  Zip is 48855.  If you want pics of an item, just PM and I'll add it this post,  it's just to many photos to put on one post.
So, this list (Updated 8-28-25) will supersede the other ads I have out there.  Thanks for looking.

Cuda Barracuda Header sheet metal
1970-74 Header sheetmetal, AKA the sheetmetal that goes between the fenders and in front of the hood.  Several good size dings, no major rust, just surface rust.  See pic, FREE if picked up.  Please pick it up before I take it to the scrap yard.

E body Dash Frame
E Body Dash frame for sale, see attached pics.  Local pick up only, located in / by Howell, MI.  FREE if picked up.  Please pick it up before I take it to the scrap yard.
.

Challenger deck lid
1970-74 Challenger Deck Lid. It has the typical rust under the lip, but it's not through the outer sheet metal, some dings, otherwise in good shape, see pics.  FREE if picked up. Please pick it up before I take it to the scrap yard.

Challenger Flat Hood
1970-1974 Challenger Flat Hood. One corner a little bent, repairable. Typical surface rust on the underside, but not through. Just the hood for sale, weatherstripping, latch, emblems, squirters not in clued. Sorry, I need them for car of mine.  Local pickup only. $80

Challenger flat hood Mid Rise Pro Stock Hood scoop
1970-74 Challenger Flat Hood with Mid-Rise Pro-stock scoop on it, Needs some work, cracks in the corner of the scoop, paint chipped. Little to no rust. Just the hood for sale, weatherstripping, latch, emblems, squirters not in clued. Local pickup only. $80

1970 Challenger LH Driver's Door will fit 70-74
LH Drivers door for 1970-74 Challenger.  It's in good condition, see the pics,  however it has the typical rusted seam at the bottom and the one corner looks crusty.  The outside sheet metal seems clean, aka no major body work and doesn't have that dull thud sound of bondo when tapped on.  But I'm not a body man, so look at the pics and please use your own judgement.  The window is there; it just appears to have fallen off the tracks.  More pics can be sent if interested.  $150  Local pickup only.

Tire inflator Bottle
Good to excellent condition.  Not 100% sure it's the one for e-bodies. Red in color, it's not the smaller silver one.  It's a original Mopar part, not a after-market part.  See pic in below.  PN:  3845638, $75

Exhaust Manifolds
I believe these are for 340 engine, Pretty sure the PNs are 3418643 & 3614368-2 and a casting date of 5.13.71, they're a little hard to read.  $150 plus shipping.

E-Body Floor Consoles
I have two floor consoles I'd like to sell.  The one console is in very good condition, no cracks, console lid shuts good (relatively speaking), has latch. The other is hacked to death. It looks like it was modified for a 4 speed.. The  Console that is in good shape & metal plate $ 150, Bad / Modified Console $ 50.


Overhead Console
This overhead console is in pretty rough shape, looks like it was cracked and re-glued, also one of the light lenses is burnt.  Ok, now for the good news, I'm pretty sure I have all the parts for it.  I really don't what they are worth, so a $ 100 or best.

Non Rally dash parts
Misc, 70 Challenger dash parts, lower lh & rh plastic sections, in-complete non-rally IP clusters. One Black bezel, headlight switches etc,.  I would like Local pickup, but will ship on your dime.  $100 for all.

Non Rally light bars
I have three standard / non-rally light bars to sell.  Some are not complete. $ 30 each or best offer, will ship on your dime. 


1970 Challenger Dash
Please see attached pics for E-Body dash, with wiring harness and other items.  The dash top / pad is pretty beat up. Like to get $ 250 out of it.  Local pickup only.

Shifter MR Gasket
Do you Remember these shifter?  Anyways, an in line shifter for e Bodies.  I have found all of the linkages.  $150

Rear Axle B-Body
B-Body Rear Axle, Shafts, backing plates, and I also have so third members if needed.  Local pickup only.  $350

Rear Third members
I have several, let me know what you're looking for. I prefer local pick up.  $200 each.

[mtull]

PM sent on the Tire inflator Bottle.

Thank you
M

[Snowdog]

As requested,  here are some pics of the tire inflator bottle.  As far as I know, it's not an after-market bottle.  I can't say for sure if it's for an E-body or a different MOPAR, we had a lot of MOPARS in our family. Maybe someone's an tire inflator expert on the site can let us know.

Thanks, Snowdoggie

[Snowdog]

Both of these items (bottle & both hood latch assemblies) have been sold.  Someone was asking about the windshield wiper bottle (note the cracks) and the hood latch assembly, both are sold/gone.

[Snowdog]

Ok, a person wanted to see pics of some of the dash component and hood hinges.  Note the two screw holes on the bottom of the R/H lower curved dash piece, probably from a aftermarket tape player. Also that's just dust on it, should clean up nicely with a little soap/water and 303, like the other dash pieces shown.  Also, the black bezel has two small holes on it's right side, maybe for a gauge mount?  Pretty sure the dash/IP bezel is from a 70 Challenger.  Hood hinges and pictured LH lower curved dash piece are sold/gone, I deleted the hinge pics.  I do still have the black bezel and both LH & RH lower curved dash pieces from a E Body dash.