*SOLD*3431077 Cuda Challenger varaiable speed wiper motor with 2822289 crank arm

[mccannix]

*SOLD*This is a super clean variable speed wiper motor that fits 70-71 Cuda Challenger.
It has a good 1170 date.
This motor has been tested and works fine.
Comes with correct 70-71 wiper linkage crank arm 2822289.
$275.00 for both plus actual shipping from 13622 NY.
Crank arms go for $100.00 by themselves in places.
If crank arm is not needed I will sell just the motor for $225.00
Thanks for the ad e-bodies

[anlauto]

Great deal for someone gees...wish I needed it

[Jay Bee]

Both pieces at that price is a steal!

[Katfish]

PM sent,

Do you need a different switch for the 3 speed motors?

[Jay Bee]

Do you need a different switch for the 3 speed motors?

Yes, 70 & 71 typically use a variable speed 2770380 switch. If converting from a 2 speed you'll also need link 2822293. I've done this swap.

[Katfish]

Do you need a different switch for the 3 speed motors?

Yes, 70 & 71 typically use a variable speed 2770380 switch. If converting from a 2 speed you'll also need link 2822293. I've done this swap.

So not the part on this motor, 2822289?
That throws a wrinkle

[mccannix]

The crank arm on the motor is correct.
What he means is you need a piece of linkage, the arm so to speak
which has a cast number of 2822293 and is correct for three speed set-ups

[Jay Bee]

What Terry said, sorry if I was a bit vague
Motor 3431077
Crank 2822289
Link 2822293
Switch 2770380
Those are the basics. You can still use the manual washer pump or convert to electric anytime later.

[6bblgt]

 

[mccannix]

1971 B-bodies used 3431077 wiper motor as well as 70-71 E-bodies.
The 3431102 varaible speed arm in the 71 B-body application, when comparing to the 2822293 varaiable speed arm in the 70-71 E-body other than a minor contour,  is virtually the same.
Same brass fittings used in both, same length, same bends, etc
Just saying you can use a 71 B-body varaible speed arm 102 as well to convert 2 speed to 3 speed in E-bodies.

[RJChallenger]

Awesome looking piece. Same date as, many parts on my May built challenger . Is it still available? How much for us Canadians and is pick up possible from Gananoque?

[mccannix]

@RJChallenger

Pick up is no problem.....or can be delivered to Moparfest.

Pm me for more info if you like.

[Jay Bee]

Would it be possible to get a picture of the 102 link on top of the 293 link with a bolt/stud through the bushings? That'll give a better idea of their similarity. I'm really curious how that 102 will work in an ebody.

[mccannix]

John
Unfortunately I dont have the 3431102 arm anymore.
I sent it with the wiper motor to Rod.
I had it on top of the 2822293, never put a bolt through or anything but both brass bushings lined up on each end
with each other.

[Jay Bee]

Thanks Terry, no problem. Just thought I'd try and catch you before they shipped out.