1970 71 Hemi valve covers

[Chryco]

Looking for a pair of 426 Hemi valve covers 1970 or 71. Does anyone reproduce them?

[RUNCHARGER]

There were Chinese repops available a few years ago. I don't see them available now though. I made the last 2 sets I needed from 66-70 covers using wedge valvecovers for parts.

[Meyer]

Iam looking for a pair aswell

[Bullitt-]

repros https://www.yesterdaysmusclecars.com/product_p/n1409.htm
used http://www.2040-parts.com/426-hemi-cuda-challenger-charger-valve-covers-1970-71-original-mopar--i520949/

new mopar? http://www.chicagoconnection.us/index.php?main_page=product_info&cPath=1_4_151&products_id=671

[Chryco Psycho]

I would also check with Dave & Roseville Moparts

[anlauto]

repros https://www.yesterdaysmusclecars.com/product_p/n1409.htm
used http://www.2040-parts.com/426-hemi-cuda-challenger-charger-valve-covers-1970-71-original-mopar--i520949/

new mopar? http://www.chicagoconnection.us/index.php?main_page=product_info&cPath=1_4_151&products_id=671

May be worth a phone call Tommy 

[Meyer]

Pricey

[jimynick]

Pricey

You DID say hemi, right? Get used to it. The hemi parts barons have been ripping people off forever compared to what the stuff SHOULD go for and it shows no sign of stopping now. That's the reason many more of us don't have one; it's just way more expensive than it's worth for a not numbers matching guy. Good luck anyways. 

[Flatdad]

I'm sure you're already privy to this, but just in case...

The reproduction valve covers are a much thinner gauge of steel compared to factory, which makes it harder for them to seal properly.

The biggest issue is the oil cap doesn't clock properly. So, if you're going for a correct restoration, its a dead giveaway that the car's wearing reproduction covers.

[Topcat]

There were Chinese repops available a few years ago. I don't see them available now though. I made the last 2 sets I needed from 66-70 covers using wedge valvecovers for parts.

Small Block radiator.   

[GCragtop]

I'm sure you're already privy to this, but just in case...

The reproduction valve covers are a much thinner gauge of steel compared to factory, which makes it harder for them to seal properly.

The biggest issue is the oil cap doesn't clock properly. So, if you're going for a correct restoration, its a dead giveaway that the car's wearing reproduction covers.

They are stamped incorrectly as well, very hard/impossible to use original style attaching bolts/nuts.

[RUNCHARGER]

"Small Block radiator.   "

Original to the car. Car could have the matching #'s 340 swapped in a day and no one would have ever know.

[Cuda_mark]

I'm sure you're already privy to this, but just in case...

The reproduction valve covers are a much thinner gauge of steel compared to factory, which makes it harder for them to seal properly.

The biggest issue is the oil cap doesn't clock properly. So, if you're going for a correct restoration, its a dead giveaway that the car's wearing reproduction covers.

They are stamped incorrectly as well, very hard/impossible to use original style attaching bolts/nuts.

Pictures of the above: https://forum.e-bodies.org/parts-wanted/25/70-71-hemi-valve-covers/9031/msg124981#new