74 cuda seat belt interlock wiring

[Ohiowoodchuck]

Looking for the seat belt wiring harness and the underwood hood relay and wiring etc. please let me know.

[Cudajason]

do you mean the pieces that go underneath the seat?

[Ohiowoodchuck]

I'm looking for the harness that plugs into the dash harness that runs to the seats and the under hood harness with the relay and push button.

[cudabin]

I have this leftover from my project. It is the interlock module and harness that picks up the seat inputs located at the driver's side kick panel. I do not have the harness located in the engine bay or the interlock relay.

[71vert340]

Here's the push Button Reset in engine compartment. I'm not sure what part number you need. These may be from a 74 Charger. The one on the right looks like it may have been loose on the mounting bracket, and someone used epoxy to tighten it up.
Terry W.

[Ohiowoodchuck]

I got the module I need the wiring harness that plugs into the grey connector and then goes to the seats and everything under the hood. If I knew this I would have bought a new harness for a 71 instead of a 74 and not tried to put all this back in it.

[Mr Cuda]

I don't know where the plugs go to, but I have an extra floor harness that connects both seat belt retractors.
There are 2 slightly angled plugs on the harness. Seat belt takes the T connector.

[Ohiowoodchuck]

The plug in to the main harness should look like this. I can't tell by your pictures if it does or not.