Challenger Grill Bracket Bolts

[moreparts]

Wanted 2 each of the grill bracket mounting bolts used on a '70 Challenger as seen in pic.

[mtull]

Wanted 2 each of the grill bracket mounting bolts used on a '70 Challenger as seen in pic

How particular are you on the head markings?  A lot of venders offer grill fastener sets but you rarely see the head markings in their advertisement.  Some of the venders only offer the smaller diameter washer for all four bolts.  I think this might be the correct one with the larger washer: B-15502.  AMK provides the measurements but the downside is they have a minimum order amount.

[moreparts]

Thanks for the link, MTull.  I'd prefer the correct markings of course, but the AMKs as a backup would work too until I found a proper set.  But I guess even AMK are a moot issue unless I could come up with an order size to make it worth the purchase.

[mtull]

I'll double check the MMC fastener guide tomorrow but I believe the link I posted is the correct head marking. 

[moreparts]

Thanks, MTull.  If your guide can verify the markings on the other bolt too, that would be helpful.

[mtull]

B-15502 is the correct bolt for mounting the bracket to the grill according to the MMC Fastener Book.  I haven't been able to find the correct bolt/markings for those used to mount the bracket to the hood latch support.

[moreparts]

B-15502 is the correct bolt for mounting the bracket to the grill according to the MMC Fastener Book.  I haven't been able to find the correct bolt/markings for those used to mount the bracket to the hood latch support.

I appreciate you checking.  Hopefully someone comes through with a set for me.  Otherwise, I know at least I can make something work with AMK stuff.