Main Menu

e-body power brake pivot return spring

Started by 72restocuda, April 24, 2023, 04:58:35 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

72restocuda

Does anyone know who makes a reproduction brake pivot spring, thanks

Ns1aar


72restocuda

I saw that one on eBay too, pricey for a spring that won't ever be seen, the listing even states its a reproduction


Rich G.

I never saw a return spring on an E body brake pedal???

72restocuda


Rich G.

I have 3 E bodies and have worked on many more and honestly not one of them had one on there. Is that a factory piece that was missing on every car I've worked on?

EV2RTSE

70 only I believe? In another thread I had posted that I thought mine was missing but I've since found it still dangling from the support bracket. Also the 70 linkage has a groove for the spring but the 71 & up linkage does not.



71GranCoupe

For $66 I would pass too. I would get the appropriate size music wire and make one until I found one at a decent price.

Bullitt-

 
Quote from: EV2RTSE on April 25, 2023, 06:31:37 PM
70 only I believe? In another thread I had posted that I thought mine was missing but I've since found it still dangling from the support bracket. Also the 70 linkage has a groove for the spring but the 71 & up linkage does not.


I don't know if this proves anything but Brewers lists one with spring for '70 & one without for '71-up
http://www.brewersperformance.com/proddetail.php?prod=PBP-E
http://www.brewersperformance.com/proddetail.php?prod=PBP-E71
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

Rich G.


benguin

#10
I had a post up after mine broke while being reinstalled- same situation you found, there were extremely to no options. See this thread: https://forum.e-bodies.org/whats-it-worth/15/wiw-171-master-cylinder-and-bendix-booster-for-1970-e-body/27603/msg310355#msg310355

I ended up going to a local machine shop to see about repairing mine, but ended up they had a GM (I know, I know) brake spring that was very similar in coil size and length. After a bit of careful bending to replicate the end that fits in the groove and it's been faultless. (cost < $5)

The main function of that spring is to provide positive contact with the brake light switch.  Unless you have a concours/OEM judging going on, I'd go for replicating it.  A serviceable spring isn't too hard to make, especially given the pricey options.
  Ben


EV2RTSE

Using the specs from @benguin in the other post, I went on Amazon and found something that looks to be a good enough match.
https://www.amazon.com/dp/B07Q83W6BK?psc=1&ref=ppx_yo2ov_dt_b_product_details
Here it is next to the original.

benguin

Excellent work! With just some minor bending it would be nearly indistinguishable.  And you can start a new venture to suppy the B and E body communities.
:cheers:
  Ben

dodj

Uh...what does that spring do?  :dunno:
I got my pedals out of a '70 'cuda and while maybe there was one there originally, there hasn't been one since I installed them around '88.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

benguin

The spring provides positive contact with the brake light switch when the brake pedal is released. Primary intent seemed to be for times of low vacuum from the power brake unit.

Since it was discontinued on later years, it clearly must not be required under most conditions.