Front right valence turn signal for 70 Challenger

[erik70rt]

I need the right front valance mounted turn signal for my '70 Challenger.  My current one has a short and has had the wiring hacked up.  Don't need the lens, just the signal itself.  Must have correct 1970 style connector.

Thanks!

[Cuda Cody]

I think you can buy the wire / connector only and swap them out.  Just need to pry up the little tabs to replace it.

Now to remember where I saw them for sale?   

[erik70rt]

That would be awesome.  I've never seen the connectors/wiring for sale separately.

[Cuda Cody]

@erik70rt   is this what you needed?

http://www.pgclassic.com/218-w

[HEMICUDA]

Send me the old light, I can sell you one pigtail and install it for you free.  It will be almost impossible, with out hamming it up, to install the socket without the proper die and press.  I had dies made in my machine shop for the large as well as the small side marker light sockets.

Mike
Michael@beaparts.com

[Slotts]

Nice one, Mike. 

Jim

[erik70rt]

Thanks, Mike!  I'll send you a message.

[erik70rt]

As it turns out, much like a lot of the car as I get into it, the wiring harness will need to be replaced as well.  Lots of cutting and splicing.  I got it to work for now and will pull it all out and replace it after the season. 

[HEMICUDA]

I would contact Herb's Parts now and order the pigtails, never know when they will no longer be available.  If you're not going to do them now, I would rather keep the ones I have since I restore quite a few parking light assemblies for customers.

[erik70rt]

Pigtails ordered!  Thanks!

FYI - for anyone else that needs these, Herbs has them for $44 with free shipping.

[erik70rt]

The pigtails finally arrived today - shipped from PG Classics!  So Herb's sells their part for less than they do.