Looking for a bushing for Slapstik shifter linkage rod.

[750-h2]

Just realized that I am missing this bushing. Its the bushing that goes in the shifter hole for the linkage rod. I am not aware of anyone selling new ones?  Really hope one of the members on this great site can help me out.  I can pay asap with PayPal and can also provide seller with a US address if they prefer. I have included a picture to show which bushing I am referring to.  Thanks.

[Cuda Cody]

I don't have an extra, but I have a photo of what I think you are looking for in case that helps. 

[750-h2]

Thanks Cody. That's the one. Do you know if it is reproduced?

[Burdar]

If it's not reproduced, it looks extremely easy to make on a lathe.

[Cuda Cody]

@MoparDave  would be the first person I would check with.  I think he's on vacation right now so he might not reply until he gets back.  Also, @TONY  is always a good person to check with for used items too.   

[Jim AAR]

I don't know if this is the correct bushing you are looking for, but it is on the following website:

https://www.jimsautoparts.com/transmission_parts.htm

[Burdar]

The gear shift control bushing is a different part.  Have a look at yours though.  Mine were ovaled and needed replacement. 

Secondly, NEVER buy anything from Jim's.  Never heard a good story about that place.

[anlauto]

I could use a bunch of those too....They work good for the column lock-out lever/rod on the steering column too.

[Timbbuc2]

I made mine, if I remember correctly I took one the old bushings I replace in my window. Mounted it on a bolt and put it in a drill,(like a lathe)

[gzig5]

If someone could provide a dimensioned sketch, I could probably knock a few out on the lathe from Delrin. I'd need to look at it before suggesting a price, but what do you think a repo would/should sell for? 

I guess I can take a look under my car and see if I can find it too.

[Burdar]

I guess I can take a look under my car and see if I can find it too.

Not under the car.  On the shifter itself.  Take the console out and you'll see it.

[headejm]

Is this the one? Anyone want me to dimension one? Mine is currently out of my car.

[headejm]

Or, is this the one?

[750-h2]

Yes that's the one!

[Brads70]

If you get me the dimensions/drawing I can make you one?