SE rear trim fasteners

[Chryco Psycho]

I already know the answer but it doesn't hurt to ask .
A friend needs the clips [Tee Bolts] to hold the SE rear trim panel on above the taillights .
Thanks

[Yeya93]

I made my own clips that work. Of course, i had to create them myself with some welding, cutting, and bending. But they hold onto the trim pretty well and works. Once I'm done working on the trim. i will jb weld them onto the trim itself that way they won't slip off when installing. The fastener i used is Auveco 19378.

Sent from my GM1915 using Tapatalk

[RUNCHARGER]

Good job, that will work fine.

[Yeya93]

@RUNCHARGER  thank you! It works completely fine. I'm in the process of restoring my trim myself. So i had to come up of an idea.

Sent from my GM1915 using Tapatalk

[70/6chall]

They are hard to find especially if your '70 Challenger SE or WSS. That's why I keep an extra set near by in the case that I may have to remove the panel from the car and then Oops! I broke a fastener. Here's what they look like. Thanks,   Al

[R/T's 4 R/P]

I know the belt/door trim clips are also hard to find. Are these equally hard or more difficult?
Are there corresponding auveco part numbers for these?

[Yeya93]

To answer your question, i also may have found a solution for the trims. The only thing is that you have to make the holes larger. I haven't completed done it, but it looks like it's going to work. Auveco 2943

Sent from my GM1915 using Tapatalk

[Chryco Psycho]

That is the plan to create my own , thanks for the tip on the fastener you used @Yeya93