Transmission Line Piece - see picture

[Jay Bee]

Does anyone have and willing to part with the left side piece of transmission line that's in the picture? Maybe someone that's converted from automatic to 4 speed.

That piece was tossed when the engine builder bypassed the radiator to only use my small transmission cooler. I'd like to re-introduce the rad, as long as the right side flared end wasn't cut off.

I can pay with PayPal and shipping would be to Canada- L2P2T7.

TIA
John

[RJChallenger]

Jay Bee. I thought that tranny lines were metal from the tranny to the rad?, isnt that meal line just 5/16 or 1/4 inch tubing with a single flare on the end. Goodluck my friend

[Jay Bee]

Yes, you're right they're metal and 5/16 or 1/4 with flared end.
The one in my picture was cut off from a metal line then with a rubber hose clamped to it going to the transmission cooler. That 90 degree bend makes for a better path of the rubber hose to the cooler.

[Brads70]

I remember buying something like this in the past? Not sure if it will fit your application but thought I'd mention it? Maybe check this part number at your local jobber?
https://www.amazon.ca/Dorman-624-225-Transmission-Line/dp/B000E347BG

[Brads70]

or this?

https://www.summitracing.com/parts/der-13004

[Jay Bee]

Thanks Brad. I'll ask around locally.
Would really like the factory one with its close 90 degree bend to the flare. I know I'd kink a straight one trying to bend it.