Main Menu

WTB Power Steering Shaft

Started by rebelyell, November 22, 2024, 06:07:30 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

rebelyell

Looking for a non-collapsed power steering length shaft. I'll take the whole column if that's what you have, but I need the shaft in good enough condition to make usable. Yeah, I know I can collapse my manual steering shaft, but I don't want to do that.

1970A-66Challenger

I've got a good non-collapsed shaft with steering box coupler including lower column tube with reverse lockout arm. If interested I can send a pic. Do you know what the length of the shaft should be for power steering so that I can confirm?

1970 cuda Joe

Shaft should be about 40" according to the parts manual. Manual steering is 43". I just went through this....Joe
1970 cuda 440-6, 4 speed, Moulin Rouge, re-creation


rebelyell

Quote from: 1970A-66Challenger on November 22, 2024, 06:57:34 AMI've got a good non-collapsed shaft with steering box coupler including lower column tube with reverse lockout arm. If interested I can send a pic. Do you know what the length of the shaft should be for power steering so that I can confirm?

I'm reasonably sure I only need the actual shaft. I have the Bergman coupler and the rest of my column is good. I have a 4 speed manual, so I don't even need the reverse lockout. Guy below me is right. It should be around 40 inches in length.

1970A-66Challenger

Here's what I have. PMd ya @rebelyell