WTB Wiper Pivot Mounting Hardware

[Gary AAR]

Working on my 1970 AAR Cuda, and I came across some hardware that I need.  I am missing some hardware that bolts the windshield wiper pivot assembly to the cowl.  According to the David Wise hardware book I should have the following (6) bolts:
(2) 10-24 x 3/4 long SEMS bolt with pilot point, washer Outside Diameter = .56, chrome or silver zinc finish, used in top position.  I think the head should be stamped similar to that shown in photo circled in red.
(4) 10-24 x 3/4 long SEMS bolt with pilot point, washer Outside Diameter = .75, phosphate finish, used in bottom 2 positions.  See photos from the Dave Wise book below.   

I have the (2) silver zinc with .56 O.D. washer for the top position on each side (see photo below).  I am missing the (4) phosphate bolts with .75 O.D. washer for the bottom 2 positions on each side.  Anybody have (4) bolts they would be willing to part with?  Willing to buy and pay shipping.
Thanks for the help.

[Gary AAR]

Beware.... "jacksonmill3684" who responded to my post is a scammer.  When I asked him to send me a picture of the parts he had, he sent different pictures of bolts you could buy at the local hardware store. 

Can anyone help me out with the bolts I need.
Thanks.

[anlauto]

Attention @Cuda Cody I think we need to get rid of this jackson fella..

[Floyd]

Byron Fettig probably has them.

http://www.mmcdetroit.com/THEDAKOTACONNECTION/

[Cuda Cody]

Yup.  He's gone.

Attention @Cuda Cody I think we need to get rid of this jackson fella..

[anlauto]