Main Menu

Steering wheel puller

Started by Husk Challenger, May 19, 2018, 11:55:13 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Husk Challenger

I would like to buy one of this steering wheel puller for sale at Rockauto

Can anyone confirm me if they will work for Ebody set-up?




Challenger 73' 383ci 4spd ---> SOLD
Challenger 71' 318 904 RT clone ---> Stroker 318/392 Tf 727!

1 Wild R/T

It will work but not the best design for dealing with the coffee can at the top of an E body column....

I made my own, I made it small enough to fit down inside the coffee can so it uses short bolts & pulls nice & straight...

Jay Bee

 :iagree: Yup, easy enough to make for removing the crush can.


larry4406

I saw this home made can puller on the other site by 70chall440.  Looks rather straight forward to make as well.

Husk Challenger

Good ideas guys! Thanks!!

May you tell me what thread i have to take for the bolts? Because all my spare bolts are metric  :pokeeye:

Challenger 73' 383ci 4spd ---> SOLD
Challenger 71' 318 904 RT clone ---> Stroker 318/392 Tf 727!

anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Chryco Psycho

3/8 16 to thread into the hub inside the can
use a fine thread for the center bolt


Husk Challenger

Perfect,

Thanks a lot guys!  :drinkingbud:
Challenger 73' 383ci 4spd ---> SOLD
Challenger 71' 318 904 RT clone ---> Stroker 318/392 Tf 727!