Build sheet

[CudaGapCuda]

I have attached a pictures of my build sheet I found under the seat and picture of my VIN. I have decoded it by using information from the net and this site, I would like any comments on what you think and any input because I'm going to have a fender tag made because the original is missing.

Thanks

My Data sheet Codes 1971 Barracuda

1.   A01 = 69-71   Light Package
2.   A62 = 69-71   Rallye Instrument Cluster Package
3.   C16 = 69-71   Console w/ Woodgrain Panel
4.   C55 = 69-71   Bucket Seats
5.   C93 = 69-71   Carpet
6.   G11 = 69-71   Tinted Glass
7.   H51 = 69-71   Air Conditioning
8.   J15 = 69-71   Cigar Lighter
9.   J21 = 69-71   Electric Clock
10.   J25 = 69-71   3-Speed Wipers
11.   J31 = 69-71   Dual Horns
12.   J55 = 69-71   Undercoating With Hood Pad
13.   L05 = 69-71   Map Light
14.   L11 = 69-71   Glove Box Light
15.   L15 = 69-71   Ash Receiver Light
16.   L25 = 69-71   Cargo / Trunk Light
17.   L31 = 70-71   Hood / Fender Mounted Turn Signals
18.   L65 = 69-71   Ignition Switch Lamp / With Time delay
19.   L74 = 69-71   Headlamp Switch Lite w / Timer
20.   L76 = 70-71   Heater Control Lamp
21.   M21 = 69-71   Roof Drip Rail Moldings
22.   N85 = 69-71   Tachometer
23.   R13 = 69-71   Deluxe AM Radio (5 ½ Watts)
24.   R32 = 70-71   Dual Rear Speakers
25.   S25 = 69-71   Firm Ride Shocks Front & Rear
26.   S77 = 69-71   Power Steering
27.   W21 = 70-71   Rallye Wheels
28.   28 =       28 in Radiator
29.   EN2 =       End of Codes Assembly Line 2

A01 = 70-74 Light Package Included      Code
a.   Map / Courtesy Light          L05
b.   Glovebox Light             L11
c.   Trunk or Cargo Compartment Light   L25
d.   Ash Tray Light            L15
e.   Ignition Switch Light with Timer      L65
f.   Headlamp On Warning Buzzer      L74
g.   Fender-Mounted Turn Signal Indicator   L31
Note: In 1973, it often included fender-mounted turn signals as well

[Cuda Cody]

@6bblgt

[cuda hunter]

      

[CudaGapCuda]

So A follow up on who would you recommend for the new Fender tag (MMC Detroit)

Thanks

[cuda hunter]

Wish I could help with the follow up question. 
I've not had to have a tag made so I don't know who does the best.
Just a little advice, don't pay the "guru" for anything or you won't see your money again.
There are several who make fender tags. 
If you are after a temporary that is made of plastic to figure out the right items and look, you may look right here on the site (search) for fender tags and you will find a local here that makes them. 

A01, always included the fender top turn signals on all years of ebodies.
I think that translates across the mopar board.