Help To Make Up My Fender Tag

[Jay Bee]

After seeing ec-co's 3D printed tags I thought about doing something and would like some input. The picture is what I came up with and what I know the car originally came with. It's a pretty basic 1970 Barracuda convertible.
 
Things I don't know:
Would it be a 2,3 or 4 row tag? Would the codes be in a row or have blank spaces between some? What position would they be in?

Would collapsible wheel (W34), power steering (S77), front sway bar(S31) be on it. It also had a manual left mirror (?) and probably regular hubcaps (?).

I tried to find samples of a low optioned tag, here and on the web without any luck. So, any info from the board's experts would be appreciated. TIA

John

[1970 cuda Joe]

John. It looks like tags are printed from the bottom up. When I first got my car I studied it while going through the order pages. I looked at groups to see what was in each one to see if that fit what my car has/had. That was how I determined my car had A01. Then I looked at A04. It didn't fit that group. I contined from there but I would never have all of the numbers or codes. I could come close. I had a totally wrong one made for mine from a guy on FB. It just says "special order". The next line reads "non-production vehicle". On the bottom line it has the VIN on the RH side. I did it just for fun It's been to a couple of show where it does strike up a conversation. I painted it car colour.....Joe

[Jay Bee]

My car just came with what I posted & edited onto the image. Factory things have been changed and added to the way I liked. I get people saying, "your car's pretty highly optioned" and I'm forever telling what it actually was built as and what's changed. The 3D tag will help with that. I want the top 2 lines that are on the image printed on it as well.