1970 Challenger parts

[ogre]

I have a few spare things from my Challenger build: Nice to recoup a little to continue the build.

1. original, used 70 challenger driver quarter panel. was on a car, all spot welds drilled, all blasted clean, only issue is bottom rear few inches under the marker light was cut horizontally off. So about 1/2 a patch panel would be needed there or a piece from a donor.

2. SE rear window plug, and glass and molding for the glass.  plus spare door glass and side glass.

3. Trunk frame replacements from the rear axle to bumper, brand new thought i would need them but mine were ok.

4. passenger door complete with glass and hardware: no holes but still painted so not sure if it had been repaired earlier in life.

5. Non rally clusters, 1 with a clock one without.

6. SE ceiling console with a light

7. rear seat frame only (I stripped the soft stuff, it was compromised)

8. Hurst vertigate shifter, with lockout, all the rods.

9. 71 taillights and housings (fair, no better than driver)

10. passenger side trunk extension AMD, New never used. 72 bumpers (painted needs stripping), 70 Bumpers good for rechrome or 20 footers.

That would clean things up a bit, I just dont want to overcharge or undercharge.