T/A Heads and Six Pack Setup Value?

[CudAARdeluxe]

Hi all, I came into possession of a standard 71 340 Block with True T/A or AAR Heads with the offset pushrods and correct rockers, as well as the six pack intake and original carbs. it all runs, it sounds cammed but i'm not sure if it's the AAR or T/A Cam. I'd like to sell it with the 727 it's paired to, how much would something like that be worth?

Edit: intake part number is 3418681, Block part number is 2780930, Carb Lists are 4792, 4790, and 4394-1, Heads are stamped J with 3418915 part number the rocker arms have the proper 072, 073, and 074 castings. last time it ran was yesterday, all very clean

[R/T's 4 R/P]

Did you check the block PN? (Not VIN)
Some TA blocks got used into the 71 model year.

[cuda hunter]

There is a lot of variance in your description to price value. 
Can you possibly get some stamp numbers, cast numbers and date codes?
That would indeed help the value discussion.
Also, some pictures of how clean or not clean it is.
When was the last time it was ran?

[Mr Cuda]

 I have the same question about head and rocker value.
 The heads will all be the same date range, as they were all for the one limited car run.
 They were available over the counter, but I hear they were leftovers, so same.
 Value depends on porting, milling, and seat height. They were used and abused by racers, so....
 There are more heads floating around than rockers.
 That's all I got.