Anyone know make of this Brake Booster Conversion kit? (Instructions needed)

[docmel]

Please understand, not flaming ( at least, not yet) the place I purchased this Power Brake Conversion kit from:  If I dont get help from the folks I ordered it from, comments will be in a seperate post..................

Bottom line, no instructions came with this kit.  There is no manufacturer listed on the box it came in, nor on any of the parts, nor on the included invoice 

Emailing and calling the actual vendor I bought it from, (NC CUSTOMS LLC out of New Caney TX, I guess a Independant dealer) , has gotten me no instructions or make of the part yet.  But I am giving them some time to properly respond

In the meantime:

Can anyone ID the manufacturer of the kit I have?  Maybe someone has an old set of instructions for this particular kit they can email me, or if I get who actually made the kit, I can get a set from them  (I dont want to guesstimate on how this booter kit installs.  That usually ends up in poor installation, wasted time or broken/bent parts = liability, inj, death.................

Again, my thanks for the help given to me since I joined this forum...........

https://www.ebay.com/itm/Mopar-8-Dual-Power-Brake-booster-1-bore-master-Kit-B-E-Body-Disc-Drum/142191369734?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

[RUNCHARGER]

Sort of looks like CPP, second choice would be Mster Power I think. Or maybe not. Here is a selection;

https://www.summitracing.com/search/part-type/master-cylinder-and-brake-booster-assemblies/make/dodge/model/dart

LEED looks closer. Where I used to work we had that stuff in bulk and would throw a kit together (for the GM guys). I imagine the guys where you bought this kit from probably do the same.

[docmel]

Run charger:  I believe you are spot on.   Going to the Summit site and bringing up your link, it does appear that the LEED is very very close, if not the same setup I am now working on.  Thats a HUGE help, my many thanks.

FYI:  For those that might buy one of these kits, even the instructions that I now have are not very clear on how the linkage of the brake lever hooks up.  Its a little more complicated that one might think, but Ill get that one figured out 

Again, Thanks for the help RC

[RUNCHARGER]

You're welcome. It wasn't much but sometimes just a bit is all that's needed.