Considering New Wheels For The Challenger W/ Pics

[Daveh]

Hey guys,

I'm considering new 17" wheels for my 71 Challenger.  I really like the U111 Ramblers from U.S. Mags. BTW - everything is stock on my car and it is plum crazy like in the pic.   

Couple of questions:

1. I've always used 15" wheels and tires with the standard offset and backspacing.  With these 17" wheels what size do I get so I don't rub and they don't stick out.  Everything is stock on my car. 

2. My car now has 255 and 235 15" rubber on it.  I like a little more rubber on my wheels not the thin rubber that people are installing today.  Based on that what do you think I should go with in sizing again so I don't have rubbing issues?  I would rather be safe than sorry.  Thanks

http://www.us-mags.com/

Found these on Ebay.
https://www.ebay.com/itm/CPP-US-Mags-U111-Rambler-wheels-17x7-17x8-fits-DODGE-CHALLENGER-SUPER-BEE/382734950294?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

They seem to be the correct size.  Can you confirm and if so what tires? 


Dave

[ragtopdodge]

Use this tool to figure out height changes:

https://www.rimsntires.com/specspro.jsp

Unless you're going to increase the overall diameter a LOT, you won't rub going to 17s on height alone.

WIDTH is most likely what will cause you to rub.  WIDTH and Offset/backspacing.

[1 Wild R/T]

Paging Mike Goodman!! @GoodysGotaCuda to this thread please...

[Brads70]

If I remember right I think Dan has those on his beautiful Cuda? Maybe he can give you some tips?
@303 Mopar


edit: yep reply #17  https://forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/e-body-tire-sizes-what-fits-whats-too-big-what-looks-good/4016/15

[303 Mopar]

If I remember right I think Dan has those on his beautiful Cuda? Maybe he can give you some tips?
@303 Mopar


edit: yep reply #17  https://forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/e-body-tire-sizes-what-fits-whats-too-big-what-looks-good/4016/15

Yep, those are mine but they 18".  Hankook Ventus V12 245/45/18 and 275/40/18 with US Mag U111 Rambler textured gunmetal grey 18x8 and 18x9.5.  The stock spring location gives abut 3/4" room, fits inside the rear quarters with no rolled lips.  Fronts also fit perfect, no rolled lips, not rubbing on frame.

The US Mag wheels do not offer a choice on bs, so what ever is listed is what you get. However they are quality made, look good and fraction of the cost some wheels like Forgeline. http://us-mags.com/rambler-u111-w-6133.htm

You may want to check out place like www.performanceplustire.com. They offer wheel/tire packages and will deliver them mounted and balanced to your door for less than buying tires and wheels separate or at a local chain store.

[GoodysGotaCuda]

My specs are below, I have a full 10" of sidewall front and rear.

https://forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/goodysgotacuda-wheel-and-tire-specs/10283/

[nsmall]

I have the same as Dan.  Thanks Dan aka Mopar 303. 

I tried putting some photos up but I'm in the middle of nowhere here and it took forever and then my phone gave up.

Let Dan or I know if you want photos but we only have 18s and cudas. 

[Daveh]

Thanks guys I appreciate the help and advise. 

[Daveh]

Ok so I'm hooked on these.  Apparently they only come in the same size.  Will these fit my stock 71 Challenger ok? 

What size tires should I consider that won't rub?  I don't want anythig too thin I like a litte more meat. 

What suggestions do you all have?  Thanks


https://www.ebay.com/itm/CPP-US-Mags-U111-Rambler-wheels-17x7-17x8-fits-DODGE-CHALLENGER-SUPER-BEE/382734950294?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[Chryco Psycho]

I know a 295 wide will fit bare if the diff is centered perfectly but with a 17" rim you have a lot less sidewall bulge so 295 should be fine

[303 Mopar]

Ok so I'm hooked on these.  Apparently they only come in the same size.  Will these fit my stock 71 Challenger ok? 

What size tires should I consider that won't rub?  I don't want anythig too thin I like a litte more meat. 

What suggestions do you all have?  Thanks


https://www.ebay.com/itm/CPP-US-Mags-U111-Rambler-wheels-17x7-17x8-fits-DODGE-CHALLENGER-SUPER-BEE/382734950294?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

I would go with Goodys set up - 17x7 255/50/17 and if you want 17x8 rears go with 295/50/17 which is close to his 295/45/18. This will also give you 1.5" stagger.