Correct trim rings?

[GoMangoBoys]

Can anyone tell me if these are correct for the 14" rallye wheels?  The rings on the wheels that I bought are pretty beat up,  and I ran into a local deal on these, but they have a lip around the small diameter.  The rings that I have don't have a lip. If I figure this out now, it could save me time and money.
Thanks.

[70/6chall]

If this helps any, this is the original trim ring on my 14" rallye wheels. They have been on the wheels since I bought the car. The only time they came off was to be stored in my garage when I changed to aluminum after market wheels. Then decided to put the rallyes back on later. Look close at the lip on the trim ring. Thanks,   Al

[Topcat]

That's so nice.

Perfect reflection.

[GoMangoBoys]

@70/6chall  Would you say the lip on the ones I posted are the same?  I can't really tell from your picture.  Maybe I am old with failing eyesight.
Thanks

[70/6chall]

My trim rings have been with the car since 1972. I can only vouch for that time frame until now, I kept them together with the wheels just to keep it all together even when I had new tires mounted I would remove them before leaving for the tire shop then put them back on very carefully.So I believe they look like the ones you have there.
Topcat, these were the original brushed trim rings I had them polished. I've always liked the chrome look of the 15" trim rings. Thanks,   Al

[EV2RTSE]

Here's a pic of a correct NOS 14" trim ring- note the shape of the valve stem opening.

[Burdar]

The original 14" Rallye trim rings didn't have that lip in the center.  The 69 only 14" trim rings did have that inner lip though.  Those 69 rings had 4 fingers that grabbed the wheel...not like the newer style that gripped the wheel in a lot more places.  The 69 rings are worth a good bit of money.

When restoring my 73, the original 14" rings had a lot of curb scratches on the lip.  Since the project was already taking too long and nickle and diming me to death, I purchased a set of aftermarket rings.  They look a lot like yours.  They have that inner lip.  They aren't 100% perfect but they look really good on a Mopar wheel and resemble the factory pieces.

[GoMangoBoys]

So,  the bad news is that these trim rings that I had an opportunity to buy for $10 each were for a 15" wheel.  The good news is that I took a wheel with me and figured out that they did not fit BEFORE I bought them.
Oh Well.
I will try to clean up the ones that I have.  They aren't too bad, but these were nicer for $10 each which seemed like a no-brainer.

[tparker]

Just to add, my 14 inch trim does NOT have the lip either.

[Topcat]

So,  the bad news is that these trim rings that I had an opportunity to buy for $10 each were for a 15" wheel.  The good news is that I took a wheel with me and figured out that they did not fit BEFORE I bought them.
Oh Well.
I will try to clean up the ones that I have.  They aren't too bad, but these were nicer for $10 each which seemed like a no-brainer.

$10 bucks each. I'll take em!