Pitman arm

[B5fourspeed]

How far up does the nut for the steering box pitman arm go up the shaft.How much of the shaft is showing when the nut is tight.It is a power steering box.I think the torque is 120.I am building the suspension on the K frame out of the car.It is a pain because I need someone to stand on the K frame in order to torque it.

[HP_Cuda]

I can take some pics for ya Bob.

[Dakota]

The torque spec on the pitman arm for 70 Challenger with power steering is 175 ft lbs according to the service manual.  For a manual box, the spec is 120 ft lbs.

[Shane Kelley]

Maybe this will help. They may look different and go on more or less using various pitman arms.

[B5fourspeed]

Thank you for the picture Shane.

[HP_Cuda]

Bob

Sorry for the delay but here are some pics at different angles with the Fast Ratio arm.

B

[B5fourspeed]

Thanks Bryan