Billboard removal

[73440]

A plastic scraper, a hot garage and about a half hour of work has the 440 gone , just will have the adhesive residue to remove after the decal , already have the 3M adhesive remover, everyone seems to stock that.

[Dakota]

I used one of the 3M pinstripe eraser wheels to remove the body stripes on my son's 2011 Challenger a couple of years ago.   His car had been parked outside in the Texas sun for most of its life so the stripes were faded and badly cracked.    I don't think there was a single piece much bigger than a quarter.  The eraser wheel worked but it was a bear of a job.  It is very easy to stay in one play too long and burn through the clear coat.

[73440]

@anlauto , guess where the 3M W&S Remover is made ?
Almost $60 at Napa.
if it works better than the little tiny pieces I'm getting off with just a scraper it's definitely worth it

[73440]

Passenger side removed tonight using the 3M woodgrain remover .
That stuff is amazing , fast and easy, pulled it off in sheets!!
Thank you @anlauto for the tip to use the 3M !