Cuda floor tunnel height

[ebodyproducts]

I need a measurement from the top of the rocker panels, across the top to the flat spot on the floor tunnel. Is about 6" forward from the rear b-pillar seam to rocker on each side. I need to verify the floor pan height before welding.


Sent from my iPhone using Tapatalk

[SRT392]

throw up a pic of what you need and i'll take it off mine..  all my floors are factory...

[ebodyproducts]

I need the tunnel height in relation to the rocker flanges.



Sent from my iPhone using Tapatalk

[SRT392]

gotch    when i go out this morning and fire up the shop i'll get that for you   

[ebodyproducts]

Right now, the tunnel is 1/2" higher than the rocker flanges.  I appreciate your help.


Sent from my iPhone using Tapatalk

[SRT392]

so place a 2x4 on edge on each frame rail then a straight edge across the measurement i get is 1 3/4 inch. let me know if you need more

[ebodyproducts]

Thanks!!!  You are the best


Sent from my iPhone using Tapatalk