Door glass assembly

[Rdchallenger]

What's incorrect here? Besides the incorrect nut and non raised washer.

[anlauto]

That yellow roller does NOT belong...

[Rdchallenger]

That yellow roller does NOT belong...

Mucho help would be appreciated lol, I'm so damn confused and have read the manual more time I can count.

[Rdchallenger]

That yellow roller does NOT belong...

You mean the yellow stop? It was still in the glass and has never been removed. What about the orange roller?

[Rdchallenger]

That yellow roller does NOT belong...

You mean the yellow/aged stop? It was still in the glass and has never been removed. What about the orange roller?

[Rdchallenger]

I miss doing metal work 

[Rdchallenger]

Also have read through the pinned thread and it's safe to say, I haven't a clue.

[anlauto]

Yes orange...a yellowish orange 

[Rdchallenger]

Yes orange...a yellowish orange 

Hahaha! Okay, had me scratching my head. Luckily a gentleman came over earlier in his 426 early build 70 Challenger and was able to take a photo or two of inside the door. Going to give it another go tomorrow.

[Rdchallenger]

The thrill of victory, and the agony of defeat...

Anyone have an extra drivers side door glass they'd part with 

[Jocigar]

I'm sorry, the days you take two steps back really suck.   

I had a hell of a time just removing my glass so I can imagine.   All you can do is saddle up again, good luck.

[anlauto]

What a mess that creates....I've done it more then once, one time with a customer's brand new door glass,   I've learned a lot of lessons the hard way, we all have  What happened ?

[Spikedog08]

What a mess that creates....I've done it more then once, one time with a customer's brand new door glass,   I've learned a lot of lessons the hard way, we all have  What happened ?

I have also done that . . not fun in any way . . 

[71vert340]

I broke the original driver's door glass on my convertible. I installed a piece of reproduction door glass. That piece shattered on its own during the summer due to expansion. I think one of my non-metallic washers wasn't installed correctly and steel bolt came in contact with the glass a few years after a shop installed it. The next piece, the wife and I installed.
Terry W.

[Rdchallenger]

What a mess that creates....I've done it more then once, one time with a customer's brand new door glass,   I've learned a lot of lessons the hard way, we all have  What happened ?

Honestly, I was just replacing a front roller on the glass. I didn't like how much play was on it so was putting on a replacement from DMT. One second all is good, the next it blew up like a bomb. Sad part is, the new roller wasn't even all the way through the speed washer/nut so yeah.