Drip Rail & Window Channel

[340Challman]

Hey Guys,
Question about the seal that is used for the drip rail and the window channel. The drip rail seal is a very thin closed cell foam, measured .030" uncompressed. The window channel is a thicker open cell foam, measured .160" uncompressed. I've not seen these anywhere as a reproduction. What are you guys using? Thanks.

[Mopar5]

I think DMT (Detroit muscle technologies)sells what you need.

[340Challman]

Mopar5, you are right. I just found it. It helps when you search using the correct terminology.

[Mopar5]

 

[Crash520]

Could you post a link to where you found it please

[anlauto]

Could you post a link to where you found it please

@Crash520 they are included in the exterior paint gasket kit. https://www.detroitmuscletechnologies.com/e-body-1971-71-barracuda-paint-exterior-gasket-set/   You may have to contact them directly to see if they just sell the seals you're after, but the complete kit is worth every penny.

[Mrbill426]

It's been a while since I dug mine out but I think when I removed them the seals were a rubber strip?    Or did they differ though the years?

Could you post a link to where you found it please

@Crash520 they are included in the exterior paint gasket kit. https://www.detroitmuscletechnologies.com/e-body-1971-71-barracuda-paint-exterior-gasket-set/   You may have to contact them directly to see if they just sell the seals you're after, but the complete kit is worth every penny.

[340Challman]

Here's the link to the seals separate from the entire kit if you need just these.
https://www.detroitmuscletechnologies.com/mopar-e-body-70-74-weatherstrip-channel-drip-rail-to-roof-sealing-strips-rolls/

As Alan said, the entire kit looks great and I'll be buying the complete kit.