Front License Plate Breacket Bumpers

[erik70rt]

Does anyone carry the small rubber bumpers for the front license plate bracket on the Challenger? 

[Cuda Cody]

Do you have a photo of them?  I'm not seeing them in my head.  But I'm sure once I see them I'll remember who sells them.   

[erik70rt]

You can see them in this pic

[Shane Kelley]

You might have to buy a rubber bumper kit from somebody like Dave at Roseville Moparts. I'm not sure if they sell them separately or not.

[Cuda Cody]

If Dave does not have them, you might try RT Specialties.  But I get mine at a local hardware store.  They carry all kinds of automotive stuff.

http://www.parkrosehardware.com/

They don't do online sales, but you might try your local hardware store and I think I've seen them at automotive paint supply stores too.  Good luck!

[erik70rt]

We don't have those stores here in Pennsyltucky.  I'll try Tractor Supply or the local Ace.

[Burdar]

Dales Cuda Shop might sell them separately. 

[anlauto]

I've only seen a bolt/nut there, never a rubber bumper ?

Do you have the factory instruction sheet on how it was installed ?

[70/6chall]

I found these on line at Steele rubber products, Erik. Maybe these are what your looking for.   Thanks,   Al

[HP_Cuda]

Believe it or not I've also seen them at Osh.

[69BFan]

Can you post a detailed picture of the bumper?  Many of them will have distinguishing marks or part numbers on them.  Accurate dimensions would also work as well.  That way I can match it up to the different bumpers that are placed into the kits.  Off the top of my head, I do not know the exact bumper for that application.  I have them available individually.  If you can hold out and will be attending Carlisle, we will have them available as well

[1 Wild R/T]

I've only seen a bolt/nut there, never a rubber bumper ?

Do you have the factory instruction sheet on how it was installed ?

I agree

[erik70rt]

I have only seen them with bolts, too.  So this is new to me.  That's why I am asking if anyone carries them - to see if they are legit.

[Burdar]

Someone could have installed glove box bumpers on the license plate bracket.  The glove box uses really small bumpers like that.

[1 Wild R/T]

Someone could have installed glove box bumpers on the license plate bracket.  The glove box uses really small bumpers like that.

They wouldn't be small, the holes are 1/4"