Main Menu

Jack Holddown Placement

Started by 340Challman, June 01, 2021, 06:27:55 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

340Challman

Hey Everyone, In the process of changing my trunk floor I also changed the drop-offs. I hung on to both drop-offs so I would have a reference for the jack bracketry. Some how I have miss placed the drivers side and can't for the life of me find it. Can someone give me the measurements to the holder and the loop?
Thanks guys.
Kevin

Jay Bee

Sorry, I don't have the measurements you're asking for but here's what I recently did.

I gave the shop my trunk mat and asked that they weld those 2 pieces according to the cut outs on the mat. A lot of the trunk mat hook cutouts don't match the actual hook placement and people end up slicing the mat to accommodate that.

Just a suggestion

anlauto

Yup, as silly as it sounds, I was going to suggest the same thing... :looney: :bigthumb:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


340Challman

Excellent idea guys! I didn't know the mat came pre-cut. :ohyeah: :slapme5:
Kevin

Mrbill426

@Jay Bee right you are about fit.  My repo mat was WAY off on the passenger side with the cutout for the oval hole where the evap tube or lines come through  :Thud:


Quote from: Jay Bee on June 01, 2021, 07:11:43 PM

I gave the shop my trunk mat and asked that they weld those 2 pieces according to the cut outs on the mat. A lot of the trunk mat hook cutouts don't match the actual hook placement and people end up slicing the mat to accommodate that.

Just a suggestion