Picture request

[blown motor]

Can someone please post a picture of the correct screws for holding the parking lights in place on a Challenger? Or even just a pic of the head (still on the car).
Thanks.

[Cuda Cody]

I think I have a photo....  Just have to find it.  Give me a bit and I'll find it.

[71GranCoupe]

These should help. 12-24 threads

[blown motor]

Thank you. The search is on.

[jimynick]

Did they twist off Murray? They usually do unless you very carefully heat the cast aluminum leg they screw into. You can cheat- use a #10 or 12 countersunk head 1/2" screw from Home Deport and simply grind aout an 1/8th off the end. Guess how I know this? If you talk nice to Alan, I bet he's got some. 

[Spikedog08]

If you have issues . . . I have a hardware store here in my home town that sports an incredible amount of fasteners . . . A ton more than home depot . . . I will look for you if you want.

[blown motor]

Did they twist off Murray? They usually do unless you very carefully heat the cast aluminum leg they screw into. You can cheat- use a #10 or 12 countersunk head 1/2" screw from Home Deport and simply grind aout an 1/8th off the end. Guess how I know this? If you talk nice to Alan, I bet he's got some. 

No they didn't twist off. A PO loaded the car up with a WIDE assortment of fasteners at some point in the past. I don't have quite all of them replaced yet. Of the four lower screws that hold the parking lights in they have three different heads.

If you have issues . . . I have a hardware store here in my home town that sports an incredible amount of fasteners . . . A ton more than home depot . . . I will look for you if you want.

Thanks Dave. The Napa store in town has a great selection of automotive fasteners. I'll check there first.

[jimynick]

 "Of the four lower screws that hold the parking lights in they have three different heads" - You've gotta love those red Robbies, eh?