power steering

[roguedc72]

does any one here know if the borgeson steering coupler will fit a mopar power steering box? searched the web for a good while and an exact answer was hard to find

[7212Mopar]

The Borgeson coupler is longer than the stock coupler. Not sure about the spline either. You can call Peter Bergman at Bergman Autocraft, the maker of the coupler.

[Brads70]

Not sure what your intensions are but the mopar design ( as difficult as it is to assemble the cap on) allows for flex that does and will occur . If you have a solid u-joint in there it cannot flex. You might end up with a leaky box or worse down the road? Just some food for thought...