splash sheilds

[culp71]

so 71 cuda, 4 frame K member splash shields?
small front set of splash shields rivet to the frame between the K frame arms,
but how about behind, I see holes in the frame and can find a "starter" splash shield, but
what about the pass side?

[Cuda Cody]

Is it an auto or manual?

[culp71]

sorry, auto

[anlauto]

Only AUTOs had one starter shield on the driver's side, nothing on the passenger side except the two front ones as mentioned.

[culp71]

thank you once again 

[Burdar]

Did the splash shields still get attached with rivets in 71?  I was thinking that was 70 only.  When did they go to screws?

[culp71]

I believe the front two where riveted on and the rear was screwed.
but don't know for sure...

[anlauto]

I've seen both on 71's, I typically use screws on 71's 

[Jim AAR]

The front Splash Shields on my 4 spd AAR were screwed on from the factory, they had never been taken off before I took them off to blast and paint the engine compartment.

My build Date was 3-70 so that may be why they were screwed and not riveted though.