71 Elastomer bumper repair options?

[fuscobros]

Any idea on how (or if) I can repair my original 71 elastomer bumper damage?  As you can see a decent size chunk is missing and it appears to be where there is no metal behind it to act as a support if I were to try to attach some type of material similar to the original rubber/elastomer the factory used.  I know the repros from Tommy are excellent quality, but if there's any chance I can save my original-to-the-car piece that would be my preference.

[Mr Cuda]

Craft project.  I think you will need a buddy with a good bumper to make a mould of the  corner.
Then figure out what the durometer hardness  of the rubber you are looking for.
This Amazon product says 80, which is like a hockey puck according to the ad.
https://www.amazon.com/Enduro-Flex-Polyurethane-Flexible-Material/dp/B085Z6VTRT

[anlauto]

I take it you don't have the missing piece ? Send it to Tommy, he repairs originals as well

[fuscobros]

Craft project.  I think you will need a buddy with a good bumper to make a mould of the  corner.
Then figure out what the durometer hardness  of the rubber you are looking for.
This Amazon product says 80, which is like a hockey puck according to the ad.
https://www.amazon.com/Enduro-Flex-Polyurethane-Flexible-Material/dp/B085Z6VTRT

Interesting idea...the challenge is going to finding someone else with a 71 elastomer bumper from which to make a mold from.  I wonder if I can make a mold from my good side and then somehow reverse it...perhaps using a 3 d printer or something like that? 

[fuscobros]

I take it you don't have the missing piece ? Send it to Tommy, he repairs originals as well

Thanks Alan.  No the missing pice is long gone.  I'll contact Tommy to see if he has a solution.  I didn't know he repaired them.

[anlauto]

@Chryco Tommy, any hope for this 71 bumper, or is it too far gone ?

[Chryco]

Hi I would first try to align the drivers side, as it looks like is not sitting up right to the fender. The core may have a "twist" in it. the passenger side is repairable. I will PM you

[Chryco]

your bumper needs to hug the fender as such. the body line from the bumper should flow to the fender

[fuscobros]

your bumper needs to hug the fender as such. the body line from the bumper should flow to the fender

Thanks for the pic Tommy...helps me see where my bumper is off.