Best reproduction power steering hoses

[72 Challenger]

Hi E-body fam,

I am looking to replace a power steering high pressure line on my mopar and the one that failed is likely original, or at least has the pentastar and a part number on it. Who is making the most accurate reproduction's of power high pressure steering hoses? If no one is, who is making the best ones?

The low pressure side is easy to come by.

[PLY474]

@72 Challenger

I checked old receipts.  I used a Gates 356360 back in 2018.  It's been functioning fine.  If I recall correctly, the pump side metal tube was a different bend shape than the stock unit I removed, so I needed to apply some minor bending force to get it to fit around the pump.  I only found this picture comparing new and old. 

[fc7cuda]

If it's leaking from the rubber, you may check with a Hose Supply company about replacing the rubber section.  Some habr the tooling.

[72 Challenger]

Thanks everyone. I will look into some after market ones. Looks like there is not anyone who is reproducing the originals exactly.