Need some measurements----Headlight harness. 70 Challenger

[Roadman]

I'm refurbishing a headlight harness and I need a few measurements.

From the bulk head I need to know where these wires come out of the the harness to go to there switch.

            Black brake warning light that gos to the prop valve

            Yellow neutral safety that goes to the starter relay. Also need its length from harness to relay.

            Main Red 12 gauge that connects to the fuseable link.

              Thanks in advance   

[Cuda Cody]

70 / 71 Challenger harness brand new M&H.  The end of the harness is pulled to the end of the tape measure.

[Roadman]

Thanks Cody. So I can see the yellow breaks out of the harness at 34 inches from bulkhead. I can't tell on the black and red. Could you move the pic to the left ?   

[headejm]

@Roadman The black and red wires on my original harness break out 8" before the yellow wire. My wiring is out of my car if you have any more questions.

[Roadman]

@Roadman The black and red wires on my original harness break out 8" before the yellow wire. My wiring is out of my car if you have any more questions.

             Awesome @headejm thats what I need.