Main Menu

340 stock gasmilage

Started by Qda71, May 21, 2024, 02:29:04 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Qda71

1971 340 Stock rebuild
J heads
Stock manifolds
It has:
Edelbrock avs1 650
Pertronix ignition
Sg 3:23
727 auto

Freeway driving 60 mph

12.3 mpg!!!

Spark plugs tan and clean no black smoke or gas smell

Alignment done
new radial tyres
no draggin

Just Love all american iron ... but i have a soft spot for ebody mopars.

Katfish

Sounds about right, 340/518/3.73/60mph = 16.5
That's with OD, so it matches yours.

Same exact car, swapped in 5.7 for the 340, 150 more HP and now gets 20mpg.

jimynick

LOL! My '67 Valiant, 340, 4 speed, 3:91SG could often see less than 10 mpg- and that's an Imperial gallon of 160 ozs not the American 132. It depended how much you liked to hear the engine rev, who/what was beside you and how heavy your right foot felt. In my opinion, if you're getting 12+ you're probaly pretty average. Some will get more and some will get less. Price of admission and the reason the overdrive guys are in business.  :cheers:
In the immortal words of Jimmy Scott- "pace yourself!"


71vert340

#3
The best I've gotten with my stock 71 Challenger 340-4 speed and 3.23 sure grip has been 22 mpg at 55-60mph on highway. It has the stock TQ carb and stock dual points ignition. Never kicked in the 4bbl on that tank. Averages at 65 to 70mph about 19 to 20mpg on highway if I don't kick in the 4bbl. Standard 14 inch rallye wheels.
 Terry W.

chargerdon

Quote from: Qda71 on May 21, 2024, 02:29:04 PM1971 340 Stock rebuild
J heads
Stock manifolds
It has:
Edelbrock avs1 650
Pertronix ignition
Sg 3:23
727 auto

Freeway driving 60 mph

12.3 mpg!!!

Spark plugs tan and clean no black smoke or gas smell

Alignment done
new radial tyres
no draggin


What size wheels and tires do you have?  What rpms at steady 60?   I have a 74 360/408 with 600 cfm Edlebrock, and a hot lunati voodoo cam.   With th3 14" wheels and around local driving i get about 10 mpg.  But out on a highway doing 70 with the A518 overdrive engaged and lockup torque converter i got 17.5 on one 50 mile round trip to a car cruise.   Its the RPMS   

Qda71

15" 255/60
I dont have ralley dash / no tach
Just Love all american iron ... but i have a soft spot for ebody mopars.

chargerdon

Easy enough to hook up an aftermarket tachometer.  It will tell you a lot.   With 15" wheels and a 3.23 axle you are probably turning around 2500 RPMS at 60 and near 3000 at 70.   An overdrive would definitely help on freeway type driving.   


Rdchallenger

I'm more worried about smiles per gallon with my 340  :burnout:

Dakota

340 w/ unknown cam, stock intake and exhaust manifolds, MSD spark box, FiTech throttle body fuel injection with A-833 OD tranny and 3.53 SG rear: 15-16 mpg around town, maybe 18 mpg for longer highway runs.  Turns about 2100 rpm at 70 mph. 

chargerdon

You want smiles per gallon...  Thats what i get from my 360/408 stroker with lunati 703 cam, headers, Edlebrock RPM air-gap with 14" wheels and 3.23 suregrip and the A518 overdrive.   But the more smiles the worse the fuel economy.