Main Menu

440 motor mount to K frame fitment

Started by ksierens, June 25, 2019, 06:49:47 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

ksierens

I am putting my engine back on the K frame. Should the motor mounts sit completely on the K frames ears? I seem to have a gap.

Sent from my SAMSUNG-SM-G930A using Tapatalk

1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54

Chryco Psycho

Should sit flat .
Mount is probably made in China or India

ksierens

Crap, got them from Rock Auto.  Any particular brand or store fit better?

Sent from my SAMSUNG-SM-G930A using Tapatalk
1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54


Chryco Psycho

When they are on there you should have some play with the bolt hole , the nolt should not be supporting the weight ,
Dave @ Roseville would be my next call

ksierens

I even took a rotary file and opened up the holes on the K frame and the through hole of the motor mount, still won't sit down. Thanks.
1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54

ksierens

I picked up a different set of motor mounts from Dave at Roseville, they are Anchor brand and fit like the should have.

Word of warning, do not buy the Pioneer brand ones, they are crap.
1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54

RUNCHARGER

I through bolt any of these Chaiwan mounts these days.
Sheldon