Main Menu

70 challenger 383 - non emissions - which fuel pump?

Started by mtterry, November 08, 2022, 04:40:16 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

mtterry

Which fuel pump should I have my 70 challenger? I see them with barbs only, then some with thread and barbs.

Also there are varying lines/kits... Not sure which is correct.

Anyone have any pictures of how it routes behind the alternator etc ?

Thanks in advance!



Sent from my SM-G986U using Tapatalk


moreparts


mtterry

Quote from: moreparts on November 08, 2022, 07:08:47 PM
Bellow is a link to the fuel pump.  Do you have the Holley carb?


https://www.summitracing.com/parts/crt-m4589
None of this car was together really when we purchased 10 years ago. It's got a Holley double pumper on it now.

The fuel line kit I got had a compression fitting on it... Does it route back up just as a tube? I'll have to convert back to a thread for the fuel line off the carb.

Excuse any incorrect terms... Just an IT guy playing 3 -6 weekends a year... Need to step it up lol. Kids, house, work... You know the deal.

Sent from my SM-G986U using Tapatalk



mopar jack

I run the lines up from the pump and filter between the alternator and the water pump housing. You can make your own to adapt to the holley or buy pre bent lines to get it close. https://www.inlinetube.com/products/sdee7008


moreparts

This is the factory routing for a Holly non emissions car.


mtterry

Quote from: mopar jack on November 09, 2022, 05:34:02 AM
I run the lines up from the pump and filter between the alternator and the water pump housing. You can make your own to adapt to the holley or buy pre bent lines to get it close. https://www.inlinetube.com/products/sdee7008
Yea that's the lines I bought, but my fuel pump has two barbs and not the compression.

Sent from my SM-G986U using Tapatalk