Main Menu

Ahhh Crap!!!!! Bad lifter?

Started by Cudajason, June 02, 2019, 02:24:31 PM

Previous topic Next topic

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages1 2 3 ... 9
User actions

Cudajason

June 02, 2019, 02:24:31 PM
Well crap...this does not sound good.   :pullinghair: :pullinghair:

Pretty sure this is a bad liter...hopefully nothing more serious.

I was able to isolate it to the exhaust on the number 7 cylinder.  I ran it with the valve cover off and put pressure on the rocker arms and it quiets significantly with pressure of the pushrod side of that rocker.

sigh...what this right way to fix this.

Jason

https://youtu.be/b0qd83yWWCA 
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

Chryco Psycho

#1
June 02, 2019, 02:28:05 PM
take a magnet & pull the lifter out

nsmall

#2
June 02, 2019, 03:01:37 PM
Oh man.  I hope its something minor.  Best of luck to you.   :fingerscrossed:

Cudajason

#3
June 02, 2019, 04:52:38 PM
Quote from: Chryco Psycho on June 02, 2019, 02:28:05 PM
take a magnet & pull the lifter out


Harder then it sounds!!!!

Just does not want to come out!!!
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

RUNCHARGER

#4
June 02, 2019, 04:56:11 PM
The oil creates a bit of suction. Hopefully.
Sheldon

Cudajason

#5
June 02, 2019, 05:03:29 PM
Quote from: RUNCHARGER on June 02, 2019, 04:56:11 PM
The oil creates a bit of suction. Hopefully.

Yeah I am hopping that is what it is!!!
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

RUNCHARGER

#6
June 02, 2019, 05:15:33 PM
Did you look at the oil?
Sheldon

jimynick

#7
June 02, 2019, 05:22:12 PM
My dad used to have a tool that was like a small slide hammer that had a flanged end that locked into the lifter and it was the greatest invention since sliced bread but it's disappeared over the decades. You've got the intake back off?  :huh:
In the immortal words of Jimmy Scott- "pace yourself!"

Cudajason

#8
June 02, 2019, 05:35:39 PM
Quote from: RUNCHARGER on June 02, 2019, 05:15:33 PM
Did you look at the oil?

Only on the dipstick...looks fine, does not appear to be any metal in it.

I do not have the intake off yet. I was hoping not to have to take it off.

1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

Chryco Psycho

#9
June 02, 2019, 06:15:12 PM
I s the lifter moving up & down some ?

RUNCHARGER

#10
June 02, 2019, 06:15:26 PM
Fingers crossed.
Sheldon

Cudajason

#11
June 02, 2019, 06:20:10 PM
Quote from: Chryco Psycho on June 02, 2019, 06:15:12 PM
I s the lifter moving up & down some ?

Oh yeah moving up and down with the magnet and spinning. Just wont come all the way out!!

Jason
1974 Cuda. 360 / A500 OD.  Yes its pink, no its not my wife's car!  Yes I drive it.

Chryco Psycho

#12
June 02, 2019, 06:23:28 PM
A new lifter should just slide out .
Can you pull the dist & see the lobe ?

Brads70

#13
June 02, 2019, 06:45:24 PM
Quote from: jimynick on June 02, 2019, 05:22:12 PM
My dad used to have a tool that was like a small slide hammer that had a flanged end that locked into the lifter and it was the greatest invention since sliced bread but it's disappeared over the decades. You've got the intake back off?  :huh:


https://www.ebay.ca/itm/Performance-Tool-Hydraulic-Lifter-Removal-Tool-W84004/192897288815?hash=item2ce9930a6f:g:vesAAOSw~TdcwDXJ

RUNCHARGER

#14
June 02, 2019, 06:52:44 PM
If it raises up a bit and then won't come out the rest of the way I don't think that things look good. Sorry.
Sheldon
Print
Go Up Pages1 2 3 ... 9
User actions

Similar Topics