Main Menu

Cam selection

Started by mjb765, November 08, 2017, 03:56:37 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Chryco Psycho

So either cam will work well , with 3.55 I would move the rpm higher & use the 703 probably .
Most of the info was int he first post when I re read it sorry

mjb765

Quote from: Chryco Psycho on November 09, 2017, 05:35:53 PM
So either cam will work well , with 3.55 I would move the rpm higher & use the 703 probably .
Most of the info was int he first post when I re read it sorry

No worries...thanks for the suggestions

mjb765



RUNCHARGER

It's not bad: I prefer Lunati quality and performance lately though.
Sheldon

Chryco Psycho

Even though the #s may look similar the Lunati will out perform the comp

mjb765

#20
Quote from: Chryco Psycho on April 03, 2018, 07:14:11 PM
Even though the #s may look similar the Lunati will out perform the comp

OK...Lunati it is!

And of course it is not in stock anywhere.....so it's 1-2 weeks......

usraptor

I followed Chryco's advise and bought a Lunati for my 440.  However I ordered the 704 version since my engine is a stroker with Aluminum heads, etc.  I'm very happy with the Lunati and  I don't think you will go wrong with one for your 383.  :banana: