coil adapter bracket studs

[mtull]

I broke one the studs while removing the coil bracket, does anyone know of a source for the stud only?  I assume it's easy to press out but haven't tried yet.  I believe the stud thread size is 1/4-28 x .75

Thank you

[Brads70]

I guess depending how " correct" or "original" you want to be something like this from fastenal might help? I'd be tempted to remove what's left and tack weld a ordinary bolt on?

https://www.fastenal.com/product/details/0127573

[mtull]

@Brads70 Thank you for the suggestion and link. If I don't come across an original bracket or stud I'll probably just buy an aftermarket bracket.  At first glance the aftermarket brackets look close to original.

Thanks again
M.

[mtull]

I may have found a couple of options.  JPHW 2208 is about 1/8" shorter than original but that's still more than long enough to work, cost is .16 each plush shipping.  JPHW 2210 is the correct length however availability may be an issue.  I'm not sure if either one has the shoulder area just under the head like the original.