Converting my 71 automatic Challenger to 4 speed from PASSON PERFORMANCE

[anlauto]

I recommend Brewers Performance for all your four speed needs

[rhamson]

Using the Keisler bell housing you might need to center it with offset pins. I know we had to do it for their conversion kit a while back.

[Chryco Psycho]

this should always be checked & or adjusted 

[Sly]

Hello everyone ! The 4-speed swap begins these days, as I have gathered barely all the parts.

First step : making some room in the interior, good news the floors are in a pretty good shape for a 46 years old car !



Next step will be cleaning all this mess and start cutting the floor after receiving the AMD floor hump. Then rust protecting and paint.... I will post some pics

[303 Mopar]

Hello everyone ! The 4-speed swap begins these days, as I have gathered barely all the parts.

First step : making some room in the interior, good news the floors are in a pretty good shape for a 46 years old car !



Next step will be cleaning all this mess and start cutting the floor after receiving the AMD floor hump. Then rust protecting and paint.... I will post some pics

Be sure to ask any questions as many of us have done this swap.  I just finished mine in May.  You will love the 4 speed!   

[Sly]

Thanks a lot !
Did you create a topic about your swap ?

[303 Mopar]

Thanks a lot !
Did you create a topic about your swap ?

I did - https://forum.e-bodies.org/engine-transmission-and-rear-end/4/727-auto-to-833-4-speed-conversion/1433/

Mine is a little different because it is a Passon 833 OD behind a 392 Hemi, but the steps and parts are mostly the same. 

[Topcat]

If you plan to add a center console after the swap, you'll need the front bracket for mounting the center console.

Also, the shifter top plate is going to be different than the Auto Transmission plate you have.

http://www.ebay.com/itm/AMD-70-74-Mopar-E-Body-71-74-Mopar-B-Body-Manual-Console-Bracket-Set-2-pc-/200625890861?fits=Model%3ACuda

I recall buying the bracket separately.
Brewers perhaps. The rear one is the same for either Transmission.