Cuda hose bracket

[jlemler]

I think I'm hosed.  I ordered the heater hose bracket.  Didn't pay attention.  The package says 318, 340, and 360.  I have a 383 is there a difference? 

[Shane Kelley]

I think I'm hosed.  I ordered the heater hose bracket.  Didn't pay attention.  The package says 318, 340, and 360.  I have a 383 is there a difference?

Yes.  Completely different.  You need one like this.

[Brads70]

I think I'm hosed.  I ordered the heater hose bracket.  Didn't pay attention.  The package says 318, 340, and 360.  I have a 383 is there a difference?

Yes.  Completely different.  You need one like this.

How supplies those? Do you have a link? Dave at Roseville?

[tman]

Yes its in their catalog.  Lots of options to buy them

http://www.rosevillemoparts.com/advanced_search_result.php?keywords=heater+hose+bracket&search_in_description=1&imageField.x=0&imageField.y=0

[Brads70]

Yes its in their catalog.  Lots of options to buy them

http://www.rosevillemoparts.com/advanced_search_result.php?keywords=heater+hose+bracket&search_in_description=1&imageField.x=0&imageField.y=0

Thank you sir!   

[72 Challenger]

If you are not going for originality I am sure you could shorten the 318/340/360 one.

[Burdar]

If you are sending your stock fasteners out to be replated in clear/silver zinc, then send that bracket along with them.  It won't cost you anything extra and it will come back looking new.  Just use some plasti-dip on the hose end when you get it back.

[Shane Kelley]

I think I'm hosed.  I ordered the heater hose bracket.  Didn't pay attention.  The package says 318, 340, and 360.  I have a 383 is there a difference?

Yes.  Completely different.  You need one like this.

How supplies those? Do you have a link? Dave at Roseville?

Yes Dave @Roseville is where it came from.