Main Menu

Pitting on gears

Started by Shoooter, February 16, 2019, 11:07:03 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Shoooter

February 16, 2019, 11:07:03 PM
I opened up the a833 I bought and the gears have some putting on them. It looks like the hard surfacing is coming off alittle in spots, like little pits. I'm assuming I need a new gear set?

BIGSHCLUNK

#1
February 16, 2019, 11:31:15 PM
Once it starts , it don't stop.  But depending how bad it is, you can sometime nurse it for a while  :wrenching:

Shoooter

#2
February 17, 2019, 07:09:56 AM
Its just starting,  but I have the transmission apart now so I'll find a set of gears.

Chryco Psycho

#3
February 18, 2019, 09:40:31 PM
You could put in Passons 18 spline OD 4 spd set

Shoooter

#4
February 19, 2019, 06:48:31 AM
Sounds expensive haha

dodj

#5
February 19, 2019, 07:15:21 AM
I couldn't find it on the Passon website.  :alan2cents:
Was curious how much $$ that would be.
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

RUNCHARGER

#6
February 19, 2019, 07:26:02 AM
It used to be $2k US I believe, not sure he still carries them.
Sheldon

dodj

#7
February 19, 2019, 05:03:55 PM
Yikes! I think I know why he doesn't carry them anymore....
2K for 4 gears?
"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill

RUNCHARGER

#8
February 19, 2019, 07:19:15 PM
It seems to me that's gears, synchros, bearings and I'm going by memory. It actually was a fair deal I think.
Sheldon

Chryco Psycho

#9
February 20, 2019, 07:25:28 AM
it is Not just 4 gears ,
you have input shaft & gear , Mainshaft is different also , complete countershaft cluster gear with the pin it rides on &  & the 3 gears on the mainshaft + 2 new syncros & 4 syncro rings , brgs too
basically new everything inside the case
Print
Go Up Pages1
User actions

Similar Topics