Show me your Small Block LA aftermarket valve covers!

[bentpshrods]

   Had these on the cuda around 1980.  Now they are on the ceiling above my bench as garage art.   

[Mickm]

Mopar performance with some matching NuPar dress up goodies.
Mickm

[76orangewagon]

Here's a couple of custom sets I've made in the past. The Black and grey ones started as Mopar Performance cast Valve covers that I milled off the fins and added a 2" spacer to. The Power Wagon ones started as a Fabricated set before modifications.

[Dakota]

Here's a couple of custom sets I've made in the past. The Black and grey ones started as Mopar Performance cast Valve covers that I milled off the fins and added a 2" spacer to.

Those are gorgeous!     

[Shane Kelley]

I've configured this engine 3 different ways. Last pic is current and my favorite.

[FSHTAIL]

Here's a couple of custom sets I've made in the past. The Black and grey ones started as Mopar Performance cast Valve covers that I milled off the fins and added a 2" spacer to. The Power Wagon ones started as a Fabricated set before modifications.

I'm curious as to what it looks like under that 5.9 Power Wagon cover you have, thats pretty trick..